Connect Gravity Forms to Resend

Both apps 59Gravity Forms 31Resend 28

• Trigger
  Form Submission

  Triggers when the specified form is submitted.

• Action
  Add Entry Note

  Adds a note to a form entry. Use it to write a progress record back onto a submission — for example noting that the submission was synced to your CRM, who handled it, or why it was skipped — so the note is visible to anyone reviewing that entry in WordPress.

• Action
  Create Entry

  Creates a new form entry.

• Action
  Create Feed

  Attaches a new add-on feed to a form. A feed is one add-on's configuration on a form — the rule that says what should happen when the form is submitted, such as creating a WordPress user, adding the person to a mailing list, or taking a payment.

• Action
  Create Form

  Creates a new form on the WordPress site and returns its id. Supply the form's title and, if you want the form ready to collect data, the fields it should show.

• Action
  Create Form Feed

  Attaches a new add-on feed to a named form. Does the same thing as Create Feed, but takes the form as part of the address rather than in the settings — use whichever reads better in your automation.

• Action
  Delete Entry

  Removes a form entry. By default the entry is moved to the trash and can still be restored from the Entries list; you can choose instead to delete it outright so it cannot be recovered.

• Action
  Delete Feed

  Permanently removes an add-on feed from a form, so that add-on no longer acts on the form's submissions. The form itself and its entries are untouched.

• Action
  Delete Form

  Moves a form to the trash on the WordPress site. The form stops accepting submissions and disappears from the forms list, and the site owner can still restore it or empty the trash in WordPress.

• Action
  Delete Note

  Permanently removes an entry note. Use it to clear a note you logged against a submission, for example after a failed sync was retried successfully.

• Action
  Get Entry

  Retrieve a single form entry, including every field value the person submitted.

• Action
  Get Feed

  Returns one add-on feed by its id, including the add-on's settings. A feed is one add-on's configuration attached to a form — the rule that says what should happen when the form is submitted.

• Action
  Get Form

  Returns one form's full definition, including every field on it, its notifications and its confirmations. Use it to read a form's field ids and labels before mapping data into that form.

• Action
  Get Form Results

  Returns the summarised answers for a survey, quiz or poll form — how many people picked each choice, and how many answered each free-text question — rather than the individual entries. On a form with a lot of entries the summary is built in the background, so the result can come back marked as still being calculated.

• Action
  Get Note

  Returns a single entry note by its id, including the note text, the entry it belongs to, when it was recorded and who it is credited to.

• Action
  List Entries

  Returns form entries from across every form on the site, newest first, and can narrow the results to one form or to entries whose answer to a chosen question matches a value you give.

• Action
  List Entry Notes

  Returns every note attached to one form entry — both notes people have added and the notes Gravity Forms records automatically, such as notification failures. Use it to read back what has already been logged against a submission.

• Action
  List Feeds

  Returns every add-on feed configured on the site. A feed is one add-on's configuration attached to a form — the rule that says what should happen to a submission, such as sending it to a mailing list or charging a payment.

• Action
  List Form Entries

  Returns the entries submitted on one particular form, newest first, and can narrow them to entries whose answer to a chosen question matches a value you give.

• Action
  List Form Feeds

  Returns the add-on feeds attached to one form — the rules that say what happens when that form is submitted. Returns an empty list when the form has no feeds.

• Action
  List Forms

  Returns every active form on the WordPress site, with each form's id, title and entry count. Use it to look up the id a form needs before working with that form's entries.

• Action
  List Notes

  Returns every entry note on the site, across all forms and entries. Use it to sweep recently logged notes when you do not already know which entry you are looking for; to read the notes on one known entry, use List Entry Notes instead.

• Action
  Send Entry Notifications

  Sends the notification emails an entry's form is set up to send, for an entry that already exists — useful for re-sending a confirmation, or for notifying people about an entry that was created through the API rather than by someone filling the form in.

• Action
  Submit Form

  Submit a form the way a visitor would — Gravity Forms runs the form's own validation, saves the entry, and fires its notifications and confirmation.

• Action
  Update Entry

  Change the answers on an existing form entry. Answers you leave blank keep the values they already have.

• Action
  Update Entry Properties

  Changes an entry's housekeeping flags without touching any of its answers — whether it is starred, whether it counts as read, and whether it sits in the active list, the trash or spam.

• Action
  Update Feed

  Changes an existing add-on feed's settings. Settings you do not include are left as they are, so you can change one thing without restating the rest of the add-on's configuration.

• Action
  Update Feed Properties

  Switches an add-on feed on or off, and sets the order it runs in. The add-on's own settings are left completely untouched, so this is the safe way to pause a feed without risking its configuration.

• Action
  Update Form

  Replaces an existing form's definition with the one you supply. Gravity Forms overwrites the whole form, so read the form first with Get Form and send back every part of it you want to keep.

• Action
  Update Note

  Replaces the text of an existing entry note. Use it to revise a note you logged earlier against a submission — for example updating "Sync started" to "Synced to CRM as contact 4821".

• Action
  Validate Submission

  Checks a set of answers against a form's own validation rules without saving an entry or sending any notifications. Returns whether the answers would be accepted, and the per-field error messages when they would not.

• Action
  Add Contact to Segment

  Adds a contact to a Resend segment. You can identify the contact by its ID or email address.

• Action
  Add Suppression

  Adds an email address to your Resend suppression list so no further mail is sent to it.

• Action
  Cancel Email

  Cancels a scheduled Resend email that has not been sent yet.

• Action
  Create API Key

  Creates a new Resend API key. The key itself is returned once, so store it right away.

• Action
  Create Contact

  Creates a contact in Resend. Returns the new contact's ID.

• Action
  Create Domain

  Adds a sending domain to Resend. Returns the DNS records you need to add at your domain host to verify it.

• Action
  Create Segment

  Creates a new segment in Resend for grouping contacts.

• Action
  Delete API Key

  Deletes a Resend API key so it can no longer be used.

• Action
  Delete Contact

  Deletes a contact from Resend. You can identify the contact by its ID or email address.

• Action
  Delete Domain

  Removes a sending domain from Resend.

• Action
  Delete Segment

  Deletes a segment from Resend. The contacts themselves are not deleted.

• Action
  List API Keys

  Returns the API keys on your Resend account, with each key's name and when it was last used. The key values themselves are never returned.

• Action
  List Contacts

  Returns the contacts in your Resend account, optionally limited to one segment.

• Action
  List Domains

  Returns the sending domains on your Resend account and each one's verification status.

• Action
  List Segments

  Returns the contact segments in your Resend account.

• Action
  List Sent Emails

  Returns the emails you have sent through Resend, newest first, with each email's id, sender, recipients, subject, send time and latest delivery event. Supports paging before or after a given email id.

• Action
  List Suppressions

  Returns the email addresses on your Resend suppression list, showing for each one the address, why it was suppressed (bounce, complaint or added manually), the email that triggered it and when it was added.

• Action
  Remove Contact From Segment

  Removes a contact from one of your Resend segments. Identify the contact by its ID or by its email address, and name the segment to take it out of. The contact itself is not deleted.

• Action
  Remove Suppression

  Takes an email address off your Resend suppression list so you can send to it again. Identify it by the suppression ID or by the email address itself.

• Action
  Retrieve Contact

  Returns one contact from your Resend audience, including their name, email address, whether they have unsubscribed, when they were added, and any custom properties stored on them. Look the contact up by its ID or by its email address.

• Action
  Retrieve Domain

  Returns one of your Resend sending domains, including its name, verification status, sending region, tracking settings and the DNS records it needs with each record's current status.

• Action
  Retrieve Segment

  Returns one of your Resend segments by its ID, with the segment's name and when it was created.

• Action
  Retrieve Sent Email

  Returns one email you sent through Resend, with its sender, recipients, subject, HTML and text body, tags, send time and latest delivery event.

• Action
  Send Batch Emails

  Sends up to 100 emails through Resend in a single call. Give it a list of emails, each with a sender, recipients, subject and body, and it returns the id of every email it created.

• Action
  Send Email

  Sends an email through Resend. Set the sender, recipients and subject, provide an HTML or plain text body, and optionally add CC/BCC, reply-to, attachments, tags or a send time.

• Action
  Update Contact

  Updates a contact in your Resend audience. Identify the contact by ID or email address, then change the name, the subscribed/unsubscribed state, or the custom properties. Anything you leave blank stays as it is.

• Action
  Update Email

  Reschedules an email you already queued in Resend, moving it to a new send date and time. Only emails that have not gone out yet can be changed.

• Action
  Verify Domain

  Asks Resend to re-check the DNS records for one of your sending domains and start verifying it. Verification runs in the background, so the domain shows as pending until it finishes.

No trigger or action matches that. Ask your agent to add it: it reads the API documentation and builds what you describe.